Modern Electronics

• Part of the SmartLine® family of products, the STA700 and STA70L are suitable for monitoring, control and data acquisition featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion ® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications.
• Accuracies up to 0.055 % of span standard & 0.04% of span optional
• Stability up to 0.02% of URL per year for 10 years
• Automatic temperature compensation
• Rangeability up to 100:1
• Response times as fast as 100ms
• Alphanumeric display capabilities
• External zero, span, & configuration capability
• Polarity insensitive electrical connections
• Comprehensive on-board diagnostic capabilities
• Integral Dual Seal design for safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
• Full compliance to SIL 2/3 requirements.
• Modular design characteristics
• Available with additional 4-year warranty

• Part of the SmartLine® family of products, the STA700 and STA70L are suitable for monitoring, control and data acquisition featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion ® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications.
• Accuracies up to 0.065% of span
• Stability up to 0.020% of URL per year for 10 years
• Automatic temperature compensation
• Rangeability up to 100:1
• Response times as fast as 100ms
• Easy to use and intuitive display capabilities
• Intuitive external zero, span, & configuration capability
• Comprehensive on-board diagnostic capabilities
• Integral Dual Seal design for safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
• Full compliance to SIL 2/3 requirements
• Modular design characters
• Available with additional 4–year warranty

• Part of the SmartLine® family of products, the STG700 and STG70L are suitable for monitoring, control and data acquisition featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications.

• Accuracies up to 0.065% of span

• Stability up to 0.020% of URL per year for 10 years
• Automatic temperature compensation
• Rangeability up to 100:1
• Response times as fast as 100ms
• Easy to use and intuitive display capabilities
• Intuitive External Zero, Span and configuration capability
• Comprehensive on-board diagnostic capabilities
• Integral Dual Seal design for safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
• Full compliance to SIL 2/3 requirements
• Modular design characteristics
• Available with additional 4-year warranty

• RISH Clamp 1000A/300A measures important electrical parameters like AC Current (TRMS), DC Current, AC Voltage(TRMS), and DC Voltage. It also features Capacitance, Ohm & Continuity, frequency, and Duty cycle and temperature measurement.

• Unique Design: Rish Clamp 1000A/300A is a highly innovative design for features those increases safety and comfort of user.
• Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
• Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks
• Location and design of trigger eliminates fatigues caused by single finger operation. It allows spreading the force required to open the jaws over more than one finger to ensure comfortable operation.
• Comfortable operation of push button

In order to cater the diversified demands of our clients, we have been able to provide a unique range of Rishmulti 18 S Digital Multimeter.

Features:

Automatic Terminal Blocking System (ABS): The automatic Terminal blocking system prevents incorrect connection of the test leads and incorrect selection of the measured quantity. This reduces danger to the user, the meter and the system to a remarkable extent.

Interface and Software RISH com 100: The multimeters are fitted with a serial RS-232 C interface via which the measured values can be transmitted to a PC. These values, electrically isolated, are transmitted to the attachable interface adaptor with infrared light through the case*.

MIN/MAX Value Storage: In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated and stored.

Indication Of Negative Values On The Analog Scale: When measuring DC quantities, also negative values are shown on the analog scale so that variations of the measured value can be observed at the zero point.

Indication Of Negative Values On The Analog Scale: The measuring principle employed permits the measurement of the root-mean-square value (TRMS) of AC quantities and mixed quantities (AC and DC) regardless of the waveform.

Automatic Data: The DATA HOLD function makes it possible to hold the digitally displayed measured value. According to a patented method, it is ensured that no freak value but the actual measured value is held in the case of rapid changes in measured quantities. The held measured value appears on the digital display. The actual measured value continues to be shown on the analog scale.

Auto-ranging / Manual Range Selection: The measured values are selected with rotary switch. The measuring range is automatically matched to the measured value. The measuring range can also be selected manually via the AUTO/MAN push button.

Continuity Test: This permits testing for short circuit and open circuit. In addition to the display, a facility of sound signal is available.

 Temperature Measurement: It is possible to use all models of RISH multi series, in direct connection of temperature sensor Pt 100 / Pt 1000. The meters automatically detects the type of sensors connected to it & displays directly measured temperature.

Signaling in the case of a blown fuse: The display FUSE points to a blown fuse

Power economizing circuit: The meter disconnects automatically when the measured value remains unchanged for about 10 minutes and no operating control was operated during this time. The disconnection facility can be disabled.

Overload Warning: A sound signal indication violation of the overload limits.

Protective holster for rough duty: A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop. The rubber material makes for the meter to stand firmly even on vibrating surface.

The top model Rish multi 18S features a 4 3/4 digit display (31 000 digits) as well as the following additional functions: Event counter, measurement of the duration of the event, time counter (stop watch), data compare, dB measurement, wide-range capacitance measurement.

• Stable Contact Reliability and Long Life 
• Easy to mount, wire, and use. 
• A large selection of models including various contact forms, DC-switching models, and open models. 
• Mechanical life: 5,000,000 operations; electrical life (under rated load): 500,000 operations. 
• Models also available with built-in diodes and for use as auxiliary power relays.

• Variable Torque AC Drive. Specifically designed for medium and high horsepower fan and pump applications. The F series offers an adjustable V/F curve and automatic voltage regulation. It also offers the capability of connecting and running consecutively four motors. A set of motors consisting of 1 variable-speed motor and 3 constant-speed motors is allowable.

• Adjustable V/f curve
• 16-step speed control and 15-step preset speed process control
• Built-in PID feedback control
• Time/fix amount circulation control
• Built-in MODBUS communication, baud rate up to 38400 bps
• Support communication module (DN-02, LN-01, PD-01)

• Air conditioner for large buildings; wastewater treatment system; water supply system for large buildings; public water supply system, etc.

• Rs 6500 to 30000 /- per piece

• Single tank - 2 level control relay
• Suitable for conductive liquids
• Sensitivity adjustment
• 1CO output relay.
• Also can be used as moisture controls relay.

The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people, clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex™ flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Measurement capability:

• 1000 A AC and dc current measurement with fixed jaw
• 2500 A AC current measurement with iFlex™ flexible current probe
• 1000 V AC and dc voltage measurement
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Frequency measurement to 500 Hz with both jaw and iFlex™
• 60 kΩ resistance measurement with continuity detection
• Min, max, average and inrush recording to capture variations automatically

Features:

• Wireless technology allows the display to be carried up to 30 ft away from the point of measurement for added flexibility without interference with measurement accuracy
• iFlex™ flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
• CAT IV 600V, CAT III 1000 V safety rating
• Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings

• Phase Failure, Unbalance
• Phase Sequence
• Under voltage, Over Voltage
• Auto reset, Fixed Unbalance Setting
• Adjustable UV/OV settings
• 2 CO output relay

• Phase Failure, Unbalance,
• Phase Sequence,
• Auto Reset, Fixed Unbalance Setting
• 1 CO output Relay

Suitable for Panels in Following Apllications:

• Agricultural Pump Starters
• 3 Ph. Split AC machines
• Hoist Motor Control
• Valve Actuator Motor
• Machine Tools
• Injection Molding M/c

• Sensor used the exclusive photo diode & color correction filter, spectrum meet C. I. E. photopic.
• Sensor COS correction factor meet standard.
• Separate LIGHT SENSOR allows user take measurements of an optimum position.
• Precise and easy readout, wide range.
• High accuracy in measuring
• Built-in low battery indicator.
• LSI-circuit use provides high reliability and durability.
• LCD display provides low power consumption.
• Compact, light-weight, and excellent operation.
• LCD display can clearly read out even of high ambient light.

• 4 wires earth measurement
• Soil Resistivity measurement
• Conductor resistance measurement
• 3 ½ Digit LCD Display
•  Rechargeable NICD Batteries

• Large LCD display, easy to read.
• Characteristic of " A " frequency weighting network are designed to meet IEC 61672 class 2.
• " Fast " time weighting characteristic mode.
• Build in adj. VR is available for easy calibration.
• Condenser microphone for high accuracy & long-term stability.
• Hold function to freeze the display value.
• Warning indicator for over and under range.
• LCD display for low power consumption & clear read-out even in bright ambient light condition.
• Used the durable, long-lasting components, including a strong, light weight ABS-plastic housing case.
• Small and light weight design allow one hand operation.
• Low battery indicator.
• High quality with economical cost.

• Part of the SmartLine® family of products, the STR700 is a series of pressure transmitters hydraulically matched and optimized with a complete set of remote diaphragm seals. Utilizing the same high performance sensor technology of the ST 800 product line Honeywell has optimized the mechanical and hydraulic designs in order to minimize the typical effects of temperature on remote seal systems. The SmartLine family is also fully tested and compliant with Experion® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications.

• Accuracies up to 0.075% of span

• Automatic static pressure & temperature compensation
• Rangeability up to 100:1
• Alphanumeric display capabilities
• External zero, span, & configuration capability
• Polarity insensitive electrical connections
• Comprehensive on-board diagnostic capabilities
• Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
• World class overpressure protection
• Full compliance to SIL 2/3 requirements.
• Modular design characteristics
• Available with additional 4-year warranty

The Fluke 115 is the compact, general purpose troubleshooting tool for field service technicians

For general purpose electrical and electronic test requirements, the Fluke 115 True RMS digital multimeter provides the perfect answer. Its simple, one-handed operation and compact design meets the needs of a wide variety of field service technicians. It measures True RMS voltage and current with 6000 count resolution as well as resistance, continuity, frequency and capacitance for quick verifications.

Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V environments.

Key features:

• General purpose digital multimeter for electrical and electronic testing
• Ideal for quick verifications and field service
• Presents a large white LED backlight for working in poorly lit areas
• Measures AC and DC voltage to 600V
• Measures AC and DC current to 10A (20 A overload for 30-seconds max)

Other useful features:

• Measures resistance, continuity, frequency, and capacitance
• Provides Min/Max/Average with elapsed time to record signal fluctuations
• Comes with a holster with probe holders for easy storage
• Features a compact ergonomic design for one-handed operation
• Fits into optional ToolPak™ magnetic hanger for hands-free operation
• CAT III 600 V safety rated